show ini-file

This command displays the device's current configuration in ini-file format.

Syntax

show ini-file

Command Mode

Basic and Privileged User

Example

show ini-file
;**************
;** Ini File **
;**************
 
;Board: Mxx
;HW Board Type: 69  FK Board Type: 84
;Serial Number: 8906721
;Customer SN:
;Slot Number: 1
;Software Version: 7.20A.140.586
;DSP Software Version: 5011AE3_R => 721.09
;Board IP Address: 192.168.0.2
;Board Subnet Mask: 255.255.255.0
;Board Default Gateway: 192.168.0.1
;Ram size: 512M   Flash size: 128M   Core speed: 300Mhz
;Num of DSP Cores: 1  Num DSP Channels: 30
;Num of physical LAN ports: 4
;Profile: NONE
;;;Key features:;Board Type: M500L ;Security: IPSEC MediaEncryption StrongEncryption EncryptControlProtocol ;Eth-Port=32 ;DATA features: Routing FireW
all&VPN WAN BGP Advanced-Routing 3G FTTX-WAN T1E1-Wan-Trunks=2 ;DSP Voice features: ;Channel Type: DspCh=30 ;E1Trunks=4 ;T1Trunks=4 ;FXSPorts=4 ;FXOPo
rts=4 ;Control Protocols: MGCP MEGACO H323 SIP SBC=4 ;Default features:;Coders: G711 G726;
 
;------  HW components------
;
; Slot # : Module type : # of ports
;----------------------------------------------
;      2 : FXS         : 4
;      3 : FXO         : 4
;----------------------------------------------
 
 
[SYSTEM Params]
 
SyslogServerIP = 10.31.2.44
EnableSyslog = 1
TelnetServerIdleDisconnect = 120
--MORE--